Hobby Tips

Getting started in Resin 3D printing - Calibrating your Printer

Getting started in Resin 3D printing - Calibrat...

When you get a new 3D printer the first thing you'll need to do is calibrate your printer and the resin that you're using.  There's a lot you'll need to...

Getting started in Resin 3D printing - Calibrat...

When you get a new 3D printer the first thing you'll need to do is calibrate your printer and the resin that you're using.  There's a lot you'll need to...

What do I need to 3D print miniatures at home and can I do it on a budget?

What do I need to 3D print miniatures at home a...

OK, so you may have been thinking about getting a 3d Printer for printing miniatures, but there are so many things to think about and so much choice on the...

What do I need to 3D print miniatures at home a...

OK, so you may have been thinking about getting a 3d Printer for printing miniatures, but there are so many things to think about and so much choice on the...

Where do I start with miniatures for D&D?

Where do I start with miniatures for D&D?

Where do I start with miniatures for D&D? Many of the models we produce can be used in Tabletop RPGs like Dungeons and Dragons (D&D), Pathfinder and more and in...

Where do I start with miniatures for D&D?

Where do I start with miniatures for D&D? Many of the models we produce can be used in Tabletop RPGs like Dungeons and Dragons (D&D), Pathfinder and more and in...

Lychee Slicer - Why do we favour it?

Lychee Slicer - Why do we favour it?

A question that we often get is why do we not always supply presupported STL files?  The truth is that we do, but we supply them in Lychee Slicer .LYS...

Lychee Slicer - Why do we favour it?

A question that we often get is why do we not always supply presupported STL files?  The truth is that we do, but we supply them in Lychee Slicer .LYS...

Miniature Scale - Size DOESN'T matter!

Miniature Scale - Size DOESN'T matter!

How often do you see companies offering the same miniature in 32mm, 40mm, 50mm, 75mm and 150mm scales?  Its become a lot more common since the advent of 3D printing,...

Miniature Scale - Size DOESN'T matter!

How often do you see companies offering the same miniature in 32mm, 40mm, 50mm, 75mm and 150mm scales?  Its become a lot more common since the advent of 3D printing,...

Lessons Learnt: 3D printing fails due to cold weather and low resin temperature

Lessons Learnt: 3D printing fails due to cold w...

This is the story of how I did a series of prints after warming my office from 5C to 23C.  The resin was still cold though and resulted in failures.  Only...

Lessons Learnt: 3D printing fails due to cold w...

This is the story of how I did a series of prints after warming my office from 5C to 23C.  The resin was still cold though and resulted in failures.  Only...